Ironworker-Reinforcing |

Introduction

Ironworkers (reinforcing) cut, bend, lay out, place and weld reinforcing steel rods, weld wire fabric and composite materials in a wide variety of structures such as buildings, highways, bridges, stadiums and towers. They also place and stress various post-tensioning systems in structures such as parking garages, bridges and stadiums where longer unsupported spans are required.

Essential Skills Requirements:

Occupational Health and Safety | |

Reading | |

Ability to read short text entries on technical drawings and forms, such as work orders, lockouts and equipment inspection sheets, e.g. read comments on work orders to learn the particulars of installation projects. (Complexity: 1) | |

Ability to read instructions about the use, maintenance and storage of personal protective equipment such as fall arrest systems. (Complexity: 2) | |

Ability to understand written instructions about the use, maintenance and storage of personal protective equipment. (Complexity: 2) | |

Ability to read safety-related information, e.g. read safety rules and regulations governing the use of rigging. (Complexity: 3 or higher) | |

Document Use | |

Ability to identify icons used in WHMIS, fire control and other hazard management systems. (Complexity: 1) | |

Writing | |

Ability to write reports to describe events leading up to workplace accidents, e.g. write about injuries and events when completing reports for workers’ compensation boards. (Complexity: 2) | |

Thinking | |

Ability to evaluate the safety of equipment and the severity of workplace hazards. (Complexity: 2) | |

Reinforcing Ironwork | |

Reading | |

Ability to understand short written comments on technical drawings. (Complexity: 1) | |

Ability to understand written instructions for the set-up, operation and maintenance of equipment. (Complexity: 2) | |

Ability to understand and interpret written codes and regulations, such as those issued by the Canadian Welding Bureau, that govern the trade. (Complexity: 3 or higher) | |

Document Use | |

Ability to locate information such as dimensions and procedures using basic scale and assembly drawings. (Complexity: 1) | |

Ability to use legends and symbols found on technical drawings. (Complexity: 1) | |

Ability to locate data such as identification numbers, specifications and quantities in moderately complex tables. (Complexity: 2) | |

Ability to locate information such as dimensions and construction procedures using moderately complex scale and assembly drawings. (Complexity: 2) | |

Ability to locate data such as radii, angles, degrees, lengths and weights in complex load charts. (Complexity: 3 or higher) | |

Ability to locate information such as dimensions and assembly procedures using complex scale and assembly drawings. (Complexity: 3 or higher) | |

Thinking | |

Ability to decide the order of tasks and their priorities, e.g. decide which installations to complete first. (Complexity: 1) | |

Ability to evaluate work projects by considering factors such as efficiencies, timelines, costs and the quality of work performed. (Complexity: 2) | |

General Duties | |

Reading | |

Ability to read instructions and warnings written on signs, labels and packaging, e.g. read signs to learn about fall hazards. (Complexity: 1) | |

Ability to interpret information contained in a variety of trade-related procedural manuals. (Complexity: 3 or higher) | |

Document Use | |

Ability to enter data such as readings and quantities into tally sheets, logbooks and other forms. (Complexity: 1) | |

Ability to locate data such as weights and quantities in simple lists and tables. (Complexity: 1) | |

Ability to read labels on product packaging, equipment and drawings to locate specifications and identification numbers. (Complexity: 1) | |

Writing | |

Ability to write reminders and short notes to co-workers. (Complexity: 1) | |

Ability to write short text entries in forms such as work orders, safety inspection forms and supply requests. (Complexity: 1) | |

Thinking | |

Ability to evaluate the severity of equipment faults by considering factors such as readings, noise levels, pressures and temperatures. (Complexity: 2) | |

Oral Communication - Listening | |

Ability to understand short spoken statements such as a simple instruction or question. (Complexity: 1) | |

Ability to understand moderately complex spoken statements such as instructions involving multiple steps. (Complexity: 2) | |

Oral Communication - Speaking | |

Ability to ask simple questions and explain simple thoughts, instructions and opinions using appropriate language. (Complexity: 1) | |

Ability to explain moderately complex thoughts, instructions and opinions using appropriate tone and language. (Complexity: 2) | |

Trade Mathematics | |

Whole Numbers | |

Ability to add, subtract, multiply and divide whole numbers. (Complexity: 2) | |

Fractions | |

Ability to add, subtract, multiply and divide fractions, e.g. measure using fractions of an inch. (Complexity: 2) | |

Decimals | |

Ability to add, subtract, multiply and divide decimals. (Complexity: 2) | |

Percents and Mixed Operations | |

Ability to use percent to locate numbers; add, subtract, multiply and divide signed numbers; complete mixed operations with whole numbers, fractions, percents and decimals. (Complexity: 2) | |

Data Analysis | |

Ability to calculate and use totals, sub-totals and basic summary measures like averages and rates; perform proportional calculations. (Complexity: 2) | |

Geometry - Basic Skills | |

Ability to analyze and draw lines and line segments; use coordinates to locate points in a plane; calculate angles; use concepts such as parallelism to solve problems. (Complexity: 2) | |

Geometry - Plane Figures | |

Ability to calculate perimeters, areas and circumferences; analyze angles and distances in triangles, rectangles and circles; analyze complex shapes into constituent plane figures. (Complexity: 2) | |

Geometry - Solids | |

Ability to calculate volumes of rectangular solids, cylinders and prisms; analyze complex volumes into constituent regular solids. (Complexity: 2) | |

Geometry - Advanced Tasks | |

Ability to analyze angles and distances in plane figures; calculate areas of other polygons; use theorem to solve problems; calculate areas and volumes of objects such as spheres, pyramids and cones. (Complexity: 2) | |

Measurement | |

Ability to measure things such as distances, weights, volumes, temperatures and angles; use and convert between Metric and Imperial measurement units. (Complexity: 2) | |

Algebra | |

Ability to construct and solve equations with one to three different variables and use common formulas. (Complexity: 2) | |

Trigonometry | |

Ability to use trigonometry to identify and calculate the unknown lengths and angles of triangles. (Complexity: 2) |